Double Glazing Locks Repair
When a double glazing window doesn't close, it creates drafts and allows valuable heat to escape. This also reduces the security of your home and puts you at greater risk of burglary.
Double-glazed window seals, hinges and handles can become damaged over time. If this happens it could affect the performance of your windows and cancel any warranties you may have.
Faulty locks
Many people install anti-burglar devices on their main doors and gates however, they forget that windows are also prime targets for burglars. Insecure locks can lead to draughts, let valuable heat escape and weaken the security of your home.
If you notice that your uPVC window locks are not working, there's a good chance that the mechanism for locking is jammed. This usually occurs due to a split in the gearbox component. This can cause the handle to not open, but instead to rotate 360 degrees. This is a common problem with uPVC casement windows, but is also seen in tilt and turn windows and even sliding sash windows.
If this happens, you can unlock the lock by pressing the lever handle. This can allow you to free the gear box and allow the window's opening. If this doesn't work, you may have to replace the window lock mechanism completely.
Most modern uPVC windows use espagnolette locks. They are an internal locking system that secures the window by using locking cams that resemble mushrooms which are inserted into frame keeps. The handle is the one that operates the gearbox that then triggers the cams to move upwards or downwards. A common issue is when the spindle on the lock has broken which causes the handle to move freely but not to move the window open or close.
A damaged gearbox may cause your window to appear to be locked but not actually be. This can happen when the central rods (sometimes called crocodile tooth fixings) within the gearbox have broken off. Misty Glaze will supply and replace the rods if this occurs.
It is crucial not to force a broken lock or stuck one. This could cause the lock to break or snap - especially with a uPVC window because it expands and expands as it warms and cools. To prevent this from happening issue, you should seek out a professional locksmith to identify the problem and repair it.
Sticky Doors/Window
The problem of windows and doors sticking is an extremely annoying problem however, they could also indicate more serious structural issues. If you are unable to open or close a window or door it is crucial to seek professional help immediately. double glazing repair near me can be caused by a number of factors like foundation settlement or a lack of support for the crawl space.
Doors and windows often are stuck due to humidity or a problem with the frame itself. When exposed to moisture, wooden frames may begin to warp. Even if the hardware looks nice, it can make it difficult to open and close your frames. When this happens the wood expands and pushes against the hinges, causing friction.
Rub the door or window with soap to decrease friction if it sticks in summer. This will help it shrink and can resolve the issue temporarily. This solution may need to be repeated periodically during periods of high humidity.
Sanding the frame of the window or door to create a smooth surface is a more durable fix. This can be done by hand or with an electric tool. A professional can also stain, sand and paint your window or door frame to get it looking fresh and new.
If soaping or sanding doesn't help, your problem may be caused by foundation settlement or a compromised crawlspace. The first thing you should do is check for cracks in the area. It's time to call a foundation specialist if you see any of these signs. Foundation damage can cause uneven floors, misaligned walls and doors that are stuck. It's important to tackle these issues as early as you can to avoid costly and dangerous repairs in the future. If not addressed the issues could get worse to the point that your entire home is structurally unstable. Contact the Southeast's top foundation repair experts today to arrange an inspection and repair service!
Cracking/Blowing Issues
Cracks can form when double glazing starts to degrade. This can be a snazzy sight and also allow all the heat in your home to escape. It also poses danger to your family as the sharp glass pieces could cause injury if they break. It is recommended to fix any double glazing windows that show a crack before it gets worse, since this could increase the cost of replacing them.
Window seals are crucial for keeping air in between the window panes and also for stopping drafts from entering your home. However, over time, they will deteriorate or shrink due to changes in weather conditions. If left unchecked, this can lead to humidity in the home as well as condensation and draughts.
This issue is typically resolved by an expert. They will be able to replace the seal on your window and bring your windows back to their original state. They can also suggest features that can reduce the risk of stress cracks, such as trickle ventilation for better ventilation.
You can also grease the handles and hinges on your windows and door. This will allow them to move more smoothly and let the lock work as intended. Apply lubricating oil to a lint-free cloth and rub it into the hinges and handle mechanism, as well as places where they go through the frame (for instance, sash windows). It is also beneficial to remove handles from their frames and clean them by using warm water to get rid of any dirt or grit which has been stuck to them.
If your uPVC doors and windows aren't functioning in the way they should, it is essential to contact an expert to fix them. They will be able to find the issue quickly and then resolve it in a short period of time. It is a lot cheaper and more secure than trying to do it yourself and potentially damaging the mechanisms. You'll also be able to rest in peace of mind knowing that your home is secure and safe.